RBX01-S2 - Single Material Dual Nozzle Head- Version 2

Be the first to review this product

Availability: In stock.


Quick Overview

This head is an update to the head which Robox launched with, it has the same features with improvements to needle sealing, material control and reliability. It has 2 nozzles, both of which are fed from a single material feed. The large 0.8mm nozzle can be used to create fast and strong draft prints or anything requiring low detail and thick walls or to quickly fill the internal parts of a print. The 0.3mm nozzle is excellent for small details and very low layer heights.

More information is available at www.cel-robox.com

RBX01-S2 - Single Material Dual Nozzle Head-  Version 2

Double click on above image to view full picture

Zoom Out
Zoom In

More Views


Following a lot of research and development of manufacturing techniques and testing of materials we have released version 2 of the Robox single material head. The concept and function remain the same, the control of material, speed of printing, maximum temperatures and reliability are all improved.

This head uses needle valves to close the nozzles to avoid stringing and blobs, it is fitted to Robox via the HeadLock system.

Some of the upgrades in the V2 head include:

-Titanium Heat Bridge - Fully all-metal construction means the head can cope with higher temperatures (>280°C) and the new titanium bridge allows for higher flowrates and reduced likelihood of a clog due to softened filament.
-Silicone Thermal Jacket - Improves heat-up time, reduces power requirement, increases thermal accuracy, keeps the nozzles clean.
-New needle seal design for improved reliability and life.
-Modified head housing for improved connection reliability with the x-carriage.
-Improved heatsink with more cooling fins and more efficient thermodynamic performance.
-PTFE liners where the filament passes through the heatsink, reducing friction and allowing for higher flowrates.
-A range of other improvements to improve the quality of assembly and serviceability.

Robox and it's upgrade parts are covered by the standard Robox warranty terms

More information about Robox is available here www.cel-robox.com

Product Code RBX01-S2
CEL category CEL Robox®
Weight for shipping (kg) 0.22
Product Name Single Material Dual Nozzle Head V2 for Robox®

-Fast fill and small details in the same layer of the print.

-Quick draft prints using the 0.8mm nozzle

-Detailed high resolution prints using the smaller 0.3mm nozzle.

Whats in the Box?

RBX1-S2 Single Material Head.

Please note: RBX1 Robox is required to use this kit. Robox is not included and is sold separately. Some simple assembly is required.

Material Compatibility PLA, ABS, HIPS, Nylon, PC, PVA. Robox will allow any suitable material from any party to be used. The user is responsible for the safe use of this material and the effect it has on Robox hardware.

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.